Products of H.S.S. Milling Cutters

Scalping and Cylindrical Cutters : are manufactured from 6" dia to 8" dia & length from 16" to 20" in light & heavy duty.These are used for scalping copper & brass strips. Material used is imported high speed steel in M2 & M35 grade.

Involute Gear Cutters are supplied to cut any number of teeth in gears from 0.5 module to 50 module & 64 DP to 0.5 DP with maximum diameter of 360 mm. Conforming to BS 2518, IS 5698 in a set of numbers. Cutters having profile of particular no. of teeth and special milling cutters are also supplied.
Chain sprocket hobs are manufactured from 1/4" pitch to 3" pitch conforming to DIN, BS & as standards in a set of 3 Cutters to cut any no. of teeth in sprockets.

These High Speed Steel cutters are form-relieved for milling convex half circles in all types of materials.

These cutters are used to produce convex corner radii up to a quarter circle. furnished with form relieved right or left hand cut.Shank type cutters are also available.

Used to produce dovetail slides for machine tool tables, jigs and fixtures. Regularly furnished right hand with 45º and 60º included angle.

Used for cutting the smaller Woodruff Keyseats. Alternate right and left hand helical flutes, can be had in flatted shank or threaded shank.

Used for opening out the bottom of previously milled slot to form a T-slot. Alternate right and left hand helical flutes, can be had in flatted shank or threaded shank.